6064MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants
| Brand Name: | Rolling Mills |
| Model Number: | 6064MB.C3 |
| da: | 130.175 mm |
| Da: | 269.999 mm |
| Ca: | 82.804 mm |
| A1: | 158.75 mm |
| A2: | 276.225 mm |
| S: | 4.763 mm |
| ba: | 65.088 mm |
| H: | 317.5 mm |
Product Details
| da | 130.175 mm |
| Da | 269.999 mm |
| Ca | 82.804 mm |
| A1 | 158.75 mm |
| A2 | 276.225 mm |
| S | 4.763 mm |
| ba | 65.088 mm |
| H | 317.5 mm |
| H1 | 160.35 mm |
| H2 | 63.5 mm |
| L | 539.75 mm |
| R1 | 95.25 mm |
| R2 | 39.688 mm |
| RG | 3/4 NPT |
| PG | 1/4 NPT |
| h | 50.8 mm |
| Housing | SSAFS 530 |
| Stabilizing ring | SR-30-0 |
| Taconite seal | TER 124 |
| End plug (suffix Y) | EPR 16 |
| Max. speed for Taconite seal | 590 r/min |
| P60° | 394 kN |
| P90° | 236 kN |
| P120° | 149 kN |
| P150° | 136 kN |
| P180° | 162 kN |
| Pa | 32.7 kN |
| Mass pillow block | 117 kg |
| Cap bolt | 7/8-9 UNC |
| Cap bolt recommended tightening torque | 813.5 N·m |
| Cap bolt, SAE grade | 8 |
| Eye bolt | 2 x 3/8-16 UNC |
| Initial grease fill | 623.7 g |
802059.H122AB Rolling Mills Sealed spherical roller bearings continuous casting plants
802057M.H122AA Rolling Mills Sealed spherical roller bearings continuous casting plants
802057M Rolling Mills Sealed spherical roller bearings continuous casting plants
802056.H122AA Rolling Mills Sealed spherical roller bearings continuous casting plants
802056 Rolling Mills Sealed spherical roller bearings continuous casting plants
802055M Rolling Mills Sealed spherical roller bearings continuous casting plants