578794 Rolling Mills Sealed spherical roller bearings continuous casting plants
| Brand Name: | Rolling Mills |
| Model Number: | 578794 |
| da: | 76.2 mm |
| Da: | 150 mm |
| Ca: | 45.796 mm |
| A1: | 88.9 mm |
| A2: | 195.275 mm |
| S: | 4.763 mm |
| ba: | 35.719 mm |
| H: | 187.325 mm |
Product Details
| da | 76.2 mm |
| Da | 150 mm |
| Ca | 45.796 mm |
| A1 | 88.9 mm |
| A2 | 195.275 mm |
| S | 4.763 mm |
| ba | 35.719 mm |
| H | 187.325 mm |
| H1 | 95.25 mm |
| H2 | 38.1 mm |
| L | 330.2 mm |
| R1 | 53.975 mm |
| R2 | 22.225 mm |
| RG | 3/8 NPT |
| PG | 1/8 NPT |
| h | 34.925 mm |
| Housing | SSAFS 517 |
| Stabilizing ring | SR-17-14 |
| Taconite seal | TER 54 |
| End plug (suffix Y) | EPR 9 |
| Max. speed for Taconite seal | 1050 r/min |
| P60° | 78.7 kN |
| P90° | 47.2 kN |
| P120° | 28.9 kN |
| P150° | 26.7 kN |
| P180° | 32 kN |
| Pa | 9.25 kN |
| Mass pillow block | 24.9 kg |
| Cap bolt | 2 x 5/8-11 UNC |
| Cap bolt recommended tightening torque | 298.3 N·m |
| Cap bolt, SAE grade | 8 |
| Initial grease fill | 110.56 g |
802059.H122AB Rolling Mills Sealed spherical roller bearings continuous casting plants
802057M.H122AA Rolling Mills Sealed spherical roller bearings continuous casting plants
802057M Rolling Mills Sealed spherical roller bearings continuous casting plants
802056.H122AA Rolling Mills Sealed spherical roller bearings continuous casting plants
802056 Rolling Mills Sealed spherical roller bearings continuous casting plants
802055M Rolling Mills Sealed spherical roller bearings continuous casting plants