578732 Rolling Mills Sealed spherical roller bearings continuous casting plants
| Brand Name: | Rolling Mills |
| Model Number: | 578732 |
| da: | 60 mm |
| db: | 73.025 mm |
| dc: | 57.15 mm |
| Da: | 130 mm |
| Ca: | 55.804 mm |
| A1: | 79.375 mm |
| A2: | 130.175 mm |
| ba: | 30.956 mm |
Product Details
| da | 60 mm |
| db | 73.025 mm |
| dc | 57.15 mm |
| Da | 130 mm |
| Ca | 55.804 mm |
| A1 | 79.375 mm |
| A2 | 130.175 mm |
| ba | 30.956 mm |
| H | 161.925 mm |
| H1 | 82.55 mm |
| H2 | 30.163 mm |
| J min. | 219.075 mm |
| J max. | 244.475 mm |
| L | 285.75 mm |
| N1 | 19.05 mm |
| R1 | 49.212 mm |
| R2 | 19.05 mm |
| RG | 1/8 NPT |
| PG | 1/8 NPT |
| h | 34.925 mm |
| Housing | SAF 312 |
| Stabilizing ring | 2 x SR-1612 |
| Labyrinth ring (db shaft position) | LOR 47 |
| PosiTrac Plus contact element (db shaft position) | B10724-44 |
| Labyrinth ring (dc shaft position) | LOR 33 |
| PosiTrac Plus contact element (dc shaft position) | B10724-32 |
| End plug (suffix Y) | EPR 7 |
| Max. speed for PosiTrac Plus seal | 2150 r/min |
| P60° | 49.4 kN |
| P90° | 29.8 kN |
| P120° | 18.2 kN |
| P150° | 16.5 kN |
| P180° | 20 kN |
| Pa | 12.9 kN |
| Mass pillow block | 13.1 kg |
| Cap bolt | 2 x 1/2-13 UNC |
| Cap bolt recommended tightening torque | 149.1 N·m |
| Cap bolt, SAE grade | 8 |
| Appropriate attachment bolt size G | 0.625 in |
| Initial grease fill | 175.77 g |
802059.H122AB Rolling Mills Sealed spherical roller bearings continuous casting plants
802057M.H122AA Rolling Mills Sealed spherical roller bearings continuous casting plants
802057M Rolling Mills Sealed spherical roller bearings continuous casting plants
802056.H122AA Rolling Mills Sealed spherical roller bearings continuous casting plants
802056 Rolling Mills Sealed spherical roller bearings continuous casting plants
802055M Rolling Mills Sealed spherical roller bearings continuous casting plants