578647 Rolling Mills Sealed spherical roller bearings continuous casting plants
| Brand Name: | Rolling Mills |
| Model Number: | 578647 |
| da: | 150 mm |
| db: | 168.275 mm |
| dc: | 146.05 mm |
| Da: | 269.999 mm |
| Ca: | 82.804 mm |
| A1: | 158.75 mm |
| A2: | 215.9 mm |
| S: | 4.763 mm |
Product Details
| da | 150 mm |
| db | 168.275 mm |
| dc | 146.05 mm |
| Da | 269.999 mm |
| Ca | 82.804 mm |
| A1 | 158.75 mm |
| A2 | 215.9 mm |
| S | 4.763 mm |
| ba | 65.088 mm |
| H | 317.5 mm |
| H1 | 160.35 mm |
| H2 | 63.5 mm |
| L | 539.75 mm |
| R1 | 95.25 mm |
| R2 | 39.688 mm |
| RG | 3/4 NPT |
| PG | 1/4 NPT |
| h | 50.8 mm |
| Housing | SSAFS 230 |
| Stabilizing ring | SR-30-0 |
| Labyrinth ring (db shaft position) | LOR 151 |
| Labyrinth ring (dc shaft position) | LOR 134 |
| End plug (suffix Y) | EPR 17 |
| Bearing limiting speed | 3000 r/min |
| P60° | 394 kN |
| P90° | 236 kN |
| P120° | 149 kN |
| P150° | 136 kN |
| P180° | 162 kN |
| Pa | 105 kN |
| Mass pillow block | 110 kg |
| Cap bolt | 7/8-9 UNC |
| Cap bolt recommended tightening torque | 813.5 N·m |
| Cap bolt, SAE grade | 8 |
| Eye bolt | 2 x 3/8-16 UNC |
| Initial grease fill | 623.7 g |
802059.H122AB Rolling Mills Sealed spherical roller bearings continuous casting plants
802057M.H122AA Rolling Mills Sealed spherical roller bearings continuous casting plants
802057M Rolling Mills Sealed spherical roller bearings continuous casting plants
802056.H122AA Rolling Mills Sealed spherical roller bearings continuous casting plants
802056 Rolling Mills Sealed spherical roller bearings continuous casting plants
802055M Rolling Mills Sealed spherical roller bearings continuous casting plants